Functional Coatings Product List and Ranking from 4 Manufacturers, Suppliers and Companies

Functional Coatings Product List

1～15 item / All 29 items

Displayed results
Shine Craft's [Lubrication and Sliding Coating]

Shine Craft's [Lubrication and Sliding Coating]

Cost reduction without lubricants, achieving a clean working environment!

Shine Kogei's lubrication and sliding coatings use coating materials blended with phenolic compounds and molybdenum disulfide to enhance the sliding properties of materials, prevent seizure, and reduce noise. These coatings are primarily applied to inconspicuous parts such as bearings, pistons and cylinders, and bolts and nuts, but they add high added value to essential components in factory equipment. We encourage you to give it a try. ◆ Inquiries ◆ When making an inquiry, it would be helpful if you could provide the following information for a smoother process: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, sliding properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating and calculations.

  • Heating and cooling equipment and facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine Craft: Features of Ceramics Armor (Ceramic Coating)

Shine Craft: Features of Ceramics Armor (Ceramic Coating)

Shine Craft's ceramic armor coating resolves all issues related to "release properties, heat resistance, and wear resistance" at once!

The Sera Armor Coating film has obtained not only compliance with the Food Sanitation Act but also approval from the U.S. FDA! It is a non-toxic and harmless coating material that achieves a high hardness film (pencil hardness 5 to 9H), heat resistance (continuous use at 500°C), and release properties equivalent to fluororesin, while also exhibiting far-infrared and antibacterial effects! Additionally, since the firing temperature can be low, it not only reduces the load on metal materials but can also be widely used on non-ferrous materials such as glass and plastics. ◆ Regarding Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating costs.

  • Heating and cooling equipment and facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine's [Functional Coating: Sera Armor - Blue Armor]

Shine's [Functional Coating: Sera Armor - Blue Armor]

Ceramics exhibit effects equal to or greater than fluorine! Surface treatment, which has been difficult until now, is possible with Shine's coating!

★Our company has developed a coating material called 'CeraArmor' with ceramic as its main component. It possesses properties equal to or greater than fluorine and can be applied to substrates that fluorine cannot be used on! If you are struggling with discoloration during post-processing or have substrates that you have given up on fluorine coating, please give it a try! 【Features of 'CeraArmor'】 　◎ Can be fired at low temperatures up to 200°C 　◎ Can be processed onto non-metal resin products 　◎ Heat resistance is over 100°C higher than fluorine coatings 　◎ Water repellency and release performance are almost equivalent to fluorine coatings 　◎ Pencil hardness of 9H! Can be used with metal spatulas, offering excellent durability ★For those who wish to use fluorine processing, 'BlueArmor' is recommended. It protects substrates from strong acids and strong alkalis. It allows for the replacement of expensive metal piping with SS400 piping. Regular inspections are also conducted! On-site repairs are performed as needed. 【Examples of 'BlueArmor' Adoption】 　◎ Manufacturing equipment in oil plants (approximately 14 years) 　◎ Sulfuric acid concentration devices (approximately 6 years) 　◎ Reaction devices using dilute hydrochloric acid (approximately 20 years) 　◎ Semiconductor device components (supplied for over 10 years)

  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine Craft: [Distributing a Collection of Case Studies on the Introduction of Ceramic Coating]

Shine Craft: [Distributing a Collection of Case Studies on the Introduction of Ceramic Coating]

Introduction to Ceramic Coating "Sera Armor"

Are you satisfied with your fluoropolymer coating? If you are facing issues such as rapid wear, frequent reprocessing, or insufficient heat resistance, we have great news for you. Shine Kogei's ceramic coating, "Cera Armor," surpasses fluoropolymer processing technology. This time, exclusively for Ipros, we are offering a technical leaflet, case studies, and samples. We also accept prototype processing. Not only can it be processed onto metals, but "Cera Armor" can also be applied to a wide range of substrates such as resins, engineering plastics, glass, ceramics, and wood, as it allows for room-temperature sintering. "Cera Armor" has been adopted not only in the food manufacturing industry but also in automotive parts, semiconductors, building materials, and aerospace fields. We accommodate both small-batch, diverse products and mass-produced items. ◆ Regarding Inquiries ◆ When making an inquiry, it would be helpful if you could provide the following information for a smoother process: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating costs.

  • Heating and cooling equipment and facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine Kogei [Ceramic Coating for Food Manufacturing Machinery]

Shine Kogei [Ceramic Coating for Food Manufacturing Machinery]

Shine Craft's non-toxic and harmless functional coating technology "Cerarmor"

In recent years, consumer awareness regarding the impact of chemical substances on human health and the environment has been increasing. This trend is particularly evident in the food, pharmaceutical, and cosmetics manufacturing industries. Shine Craft's ceramic coating "Cera Armor" is a surface treatment technology that is free from heavy metals and VOCs, making it friendly to both human health and the environment. Additionally, it does not emit toxic substances like PFOA during use. "Cera Armor" is approved under the Food Sanitation Act and by the U.S. FDA. It has also undergone antibacterial efficacy verification through the Z-2801 antibacterial test. 【Application Examples】 ■ For those exploring surface treatments with no environmental or health risks ■ For those seeking high durability and long-lasting coatings ■ In cases where fluoropolymer coatings lack heat resistance ■ For those wanting to impart high functionality to inexpensive general-purpose resins ■ For products requiring a clear color coating

  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine's "Wear-Resistant Cerarmor" and "Corrosion-Resistant Blue Armor"

Shine's "Wear-Resistant Cerarmor" and "Corrosion-Resistant Blue Armor"

High functionality provided by Shine's ceramic coating [release properties, wear resistance]

◆Ceramic Coating "Sera Armor"◆ Shine Kogei's "Sera Armor" is a coating that imparts properties such as wear resistance, release properties, and heat resistance to materials. It possesses physical properties superior to fluororesin and can form a high-hardness ceramic coating on resins, engineering plastics, glass, and wood that are typically difficult to process. 【Sera Armor Coating Properties List】 1. Wear resistance (pencil hardness 9H), 2. Release properties, 3. Slipperiness, 4. Heat resistance, 5. Water and oil repellency, 6. Insulation, 7. Corrosion resistance, 8. Rust prevention, 9. Dirt resistance, 10. Antibacterial properties, 11. Far infrared effect, etc... ◆Inquiries◆ When making an inquiry, it would be helpful to provide the following information for a smoother process. 1. Properties of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slipperiness, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating and calculations.

  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine's "Abrasion-Resistant Polyurea" and "Release-Resistant Cera Armor"

Shine's "Abrasion-Resistant Polyurea" and "Release-Resistant Cera Armor"

High functionality provided by Shine Kogei's polyurea coating [corrosion resistance, wear resistance]

<Polyurea Coating> Polyurea resin is produced through the chemical reaction between isocyanates and polyamines. By spraying polyurea onto the target object, various functionalities such as abrasion resistance, impact resistance, corrosion resistance, weather resistance, and waterproofing effects are imparted. <Ceramic Coating 'Cera Armor'> 'Cera Armor' is a coating technology that imparts properties such as release, slip, and heat resistance to materials. Generally, it has physical properties superior to fluororesin coatings and can form high-hardness ceramic coatings on resins, engineering plastics, glass, and wood that cannot typically be coated. ◆ Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating purposes.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introducing new technology for functional surface treatment! [Shine Kogei]

Introducing new technology for functional surface treatment! [Shine Kogei]

Wear-resistant "Polyurea" and release-resistant "Cera Armor"

<Polyurea Coating> Polyurea resin is produced through the chemical reaction between isocyanates and polyamines. By spraying polyurea onto the target object, various functionalities such as abrasion resistance, impact resistance, corrosion resistance, weather resistance, and waterproofing effects are imparted. For example, if you apply polyurea to an egg... Even if you hit it with a hammer or run over it with a car, it won't budge! That's how strong the coating is. <Ceramic Coating 'Cera Armor'> 'Cera Armor' is a coating technology that imparts properties such as release, slip, and heat resistance to materials. Generally, it has physical properties superior to fluoropolymer coatings and can form high-hardness ceramic coatings on resins, engineering plastics, glass, and wood that cannot typically be coated.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine Craft's "Sera Armor"

Shine Craft's "Sera Armor"

Separation-type 'Sera Armor Coating'

●Ceramic Coating "Sera Armor"● Shine Kogei's "Sera Armor" is a coating that imparts properties such as wear resistance, release properties, and heat resistance to materials. It possesses physical properties superior to fluororesins and can form a high-hardness ceramic coating on resins, engineering plastics, glass, and wood that are typically difficult to process. ●List of Sera Armor Coating Characteristics● [1] Wear resistance (pencil hardness 9H), [2] Release properties, [3] Slipperiness, [4] Heat resistance [5] Water and oil repellency, [6] Insulation, [7] Corrosion resistance, [8] Rust prevention, [9] Stain resistance [10] Antibacterial properties, [11] Far infrared effect, etc...

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Creative Coating Co., Ltd. - Technology Introduction

Creative Coating Co., Ltd. - Technology Introduction

Achieve the best surface functionality with coatings tailored to the purpose and problem.

Creative Coating Co., Ltd. is a company that has been engaged in painting for over 40 years, utilizing its experience to develop functional coating businesses. We apply coatings for surface treatments that solve problems and enhance performance, including water-repellent and oil-repellent films, fluororesins such as Teflon, and electromagnetic wave shielding. We offer a variety of coating technologies, including "molybdenum disulfide coating," which excels in low friction and wear resistance under high temperature and high load, as well as "fluororesin coating" and "ceramic coating." If you have any issues related to surface treatment and functional coatings, please consult our company, which has abundant experience and achievements. 【Features】 ■ Capable of responding with diverse coating technologies ■ Coatings that solve problems and enhance performance through surface treatment ■ Extensive track record *For more details, please refer to our catalog or feel free to contact us.

  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Special Coating

Special Coating

Carefully, quickly, and reliably! We provide coatings tailored to modern needs.

Kyoritsu Gravure Co., Ltd. offers a variety of special coatings. We have a wide range of products, including UV coating using a single-color coating machine, deodorizing antibacterial coatings, insect block coatings, and collaborative products with other companies. Additionally, by combining base paper, ink, and coatings, we can propose products tailored to a diverse range of needs, so please feel free to contact us. 【Services Offered】 ■ UV Coating ■ Insect Block Coating ■ Bromite Coating ■ Deodorizing and Antibacterial Coating ■ Surface Resin Buildup Coating, etc. *For more details, please download the PDF or feel free to contact us.

  • Plastering and painting work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine Craft's [Rubber Coating]

Shine Craft's [Rubber Coating]

Why not utilize fluororesin coating on various rubber materials? It is effective in preventing stickiness and noise in rubber materials!

A rubber coating that has been adapted for low-temperature firing, which is normally associated with high-temperature sintering fluororesin coatings. The rubber coating is a highly flexible coating material that follows the elasticity of the rubber material. It primarily enhances sliding properties and release properties, but it is also effective in preventing stickiness and noise in rubber materials! It can be widely used in O-rings, valve seals, gaskets, diaphragms, automotive rubber parts, vibration and sound insulation sheets, conveyor belts, and more. ◆ Regarding Inquiries ◆ When making an inquiry, it would be helpful if you could provide the following information for a smoother process: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, sliding properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating and calculations.

  • Rubber sheet
  • Anti-vibration rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine Kogei [Ceramic Coating for Pharmaceutical and Food Manufacturing Lines]

Shine Kogei [Ceramic Coating for Pharmaceutical and Food Manufacturing Lines]

Non-toxic and harmless functional coating technology "Cera Armor" for pharmaceutical, food, and cosmetic manufacturing lines!

In recent years, consumer awareness regarding the impact of chemical substances on human health and the environment has been increasing. This trend is particularly pronounced in the food, pharmaceutical, and cosmetics manufacturing industries. Shine Craft's ceramic coating "Cera Armor" is a surface treatment technology that is free from heavy metals and VOCs, making it friendly to both humans and the environment. Additionally, it does not emit toxic substances like PFOA during use. "Cera Armor" is approved under the Food Sanitation Act and by the U.S. FDA. It has also undergone antibacterial effectiveness verification through the Z-2801 antibacterial test. 【Adoption Results】 ■ Suzuki Co., Ltd. - Seaweed processing machine chute parts 【Application Examples】 ■ For those exploring surface treatments with no environmental or health risks ■ For those seeking high durability and long-lasting coatings ■ In cases where fluoropolymer coatings lack heat resistance ■ For those wanting to impart high functionality to inexpensive general-purpose resins ■ For products requiring a clear color coating

  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shine Craft [Fluororesin Coating for Rubber]

Shine Craft [Fluororesin Coating for Rubber]

Improved functionality with a rubber-specific 'fluororesin coating'!!

Conventional fluoropolymer coatings require shot blasting and high-temperature curing, making it difficult to process rubber. However, with Shine Craft's special coating technology, the "Rubber-Specific Fluoropolymer Coating," it is possible to form a fluoropolymer film on rubber without damaging the material. By applying the coating, the unique tackiness of rubber can be eliminated, leading to improved sliding properties. Additionally, other physical properties can be imparted. This allows for the replacement of expensive materials like silicone rubber and fluororubber with more affordable rubber. ◆ Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, sliding properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating and calculations.

  • Heating and cooling equipment and facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A coating course by Shine Craft that is easy to understand for beginners.

A coating course by Shine Craft that is easy to understand for beginners.

Why is coating necessary? [A must-see for those struggling with release properties, slip properties, corrosion resistance, etc.!]

Shine Kogei specializes in contract coating processing centered around fluororesin and ceramics. Our customers come from various fields, including automotive, semiconductors, food, chemical plants, and aerospace, but they all share a common issue: "there are functional problems with the base material." For example, if designing a base material with corrosion resistance, Inconel or super stainless steel may be considered. However, their high cost and difficulty in processing are significant drawbacks. In this context, we propose the fluororesin coating "Blue Armor." By applying this coating, we have received evaluations that it provides advantages in terms of performance and cost. Additionally, when it comes to improving the release properties of molds, achieving release performance through material alone is challenging. In such cases, applying a release agent is often used as an alternative, but this can lead to increased maintenance needs and decreased work efficiency. In these situations, a coating that firmly adheres to the base material tends to outperform in terms of performance.

  • Aggregates and crushed stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Functional Coatings

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.